Phase One of Babcock Ranch, FL is slated to open next year.
It’s pretty exciting to see that a whole community will be powered by the sun and what better place than Florida. Per EcoBuildingPulse,com, in 2006, developer Syd Kitson released plans for Babcock Ranch, a massive community to consist of 19,500 homes powered exclusively by the sun (but void of any unsightly solar systems on roofs).
Instead of individual PV panels, the community and the broader region will be supplied with solar energy via Florida Power and Light’s 74.5 megawatt Babcock Ranch Solar Energy Center. Expected to be operational by the end of the year, the 443-acre solar power plant will be located in the Babcock Ranch and will supply more than enough energy to meet residents’ needs, according to project planners.
“Babcock Ranch will exemplify what it means to be a town of the future, offering residents a highly unique balance of the most technologically advanced infrastructure and amenities, with ready access to a rich natural environment and a true sense of community,” says Kitson, CEO of West Palm Beach, Fla.-based development firm Kitson & Partners.
Phase 1 development encompasses 1,100 single-family and multifamily residences and a downtown area with a wellness center, café, restaurant, and outdoor outfitter shop.
For more information check out Builderonline.com. We’ll be on the look out for the development of the town, they should be welcoming their new residents by 2017.
It is exciting to see that a museum was chosen as one of the 2016 AIA COTE top ten green projects of the year! Check out the specs via AIA below.
From the AIA:
The Exploratorium in San Francisco, CA, is an interactive science museum that also demonstrates innovation and sustainability in its design and construction. The building takes advantage of the historic pier shed’s natural lighting and the 800’ long roof provided room for a 1.3 megawatt photovoltaic array. The water of the Bay is used for cooling and heating. Materials were used that that are both sustainable and durable enough to withstand a harsh maritime climate. The project is certified LEED Platinum and is close to reaching its goal of being the country’s largest Net Zero energy museum and an industry model for what’s possible in contemporary museums.
BY THE NUMBERS:
- Estimated percent of occupants using public transit, cycling or walking: 47%
- Daylighting at levels that allow lights to be off during daylight hours: 50%
- Lighting Power Density: 0.78 watts/sf
- Views to the Outdoors: 75%
- Percent reduction of regulated potable water: 50%
- Total EUI predicted (kBtu/sf/yr): 42
- Net EUI predicted (kBtu/sf/yr): 6
- Percent reduction from National Median EUI for Building Type (predicted): 92%
Photo Credit: Bruce Damonte Photography
On February 11 & 12, 2016, The Getty Conservation Institute and the Lunder Conservation Center at the Smithsonian will give a 2-day master class on recent developments in museum and gallery lighting. Although the application period is closed the topic itself is of utmost importance for the green museum world.
As Getty states, “this master class will present a structured framework for understanding and discussing recent advances and methodologies for the effective use and evaluation of the new generation of LED lighting, including the accompanying control options for museum settings. It will specifically address the opportunities and challenges of the introduction of color-tunable LED lighting systems and will explore how these can be utilized in museum exhibits. It will also reflect on energy consumption issues of new LED lighting systems.”
The UK’s Museum Association also did a comprehensive article that is still relevant on whether or not it is time to invest in LED lighting, it’s worth a read!
This year GreenBuild took place on the hill in DC. If you wanted to learn the latest about sustainable building it was the place to be! It featured three jam-packed days of top speakers, endless networking opportunities, showcases, LEED workshops and in-depth tours of green buildings in Washington, DC.
Here’s a short recap from BuildingGreen of the best 10 products, technologies and cutting edge ideas. They all can be pretty technical, but I am partial to the last one, USAI Lighting Color Select Tunable Lighting. This kind of controllable lighting could be a key option for museum collections requiring a special spectrum of light. Be on the look out for them!
- Johns Manville ENRGY 3.E Halogen-Free Polyiso Insulation
Johns Manville is the first manufacturer to sell a polyisocyanurate roofing insulation not containing TCPP, or Tris (1-chloro-2-propyl) phosphate, the halogenated flame retardant used in polyiso and spray foam.
- Organic Furnishings from Ekla Home
These furnishings are made from natural latex and do not require chemical flame retardants.
- KI Chair with AirCarbon Plastic
The materials that go into the KI Chair come from agriculturally-sourced methane rather than petroleum, which makes the chair carbon-negative.
- FocalPoint Bioretention System
This filtration systems provides the performance of natural storm water filtration on a very small footprint.
- Multistack Magnetic Levitation Chillers with Danfoss Compressors
These chillers cool offices, schools, and large commercial buildings; they are energy-efficient and eliminate the need for mechanical seals, gears, pumps, and many other conventional components.
- Fluid-Applied Cat 5 Air Barrier System from Prosoco
The parts that make up these air barriers are based on the high-performance “hybrid” polymer chemistry, which lacks solvents and isocyanates; in addition, the removal of phthalate plasticizers makes them eligible for use in Living Building Challenge Products.
- Clean Energy Collective
The collective develops locally-sited photovoltaic facilities across the U.S. and engages with local utilities so that local people can purchase and own PV panels within a shared array.
- Cascadia Clip Thermal Spacers
The Cascadia Clip offers support for cladding over insulation, and it decreases thermal bridging more effectively than conventional methods.
- Marvin Windows with U.S. Passive House Certification
Marvin Windows is the first major American window manufacturer to issue a Passive House Institute U.S.-certified window. These windows are available with FSC-certified wood.
- USAI Lighting Color Select Tunable Lighting
This product blends the efficacy of LEDs with the ability to provide users complete control over the color and intensity of their interior lighting.
For for information check out the full article at BuildingGreen.
A couple months back I attended a NYSERDA CHP (Combined Heat & Power) Expo in NYC. All the companies were vetted by NYSERDA and able to provide concrete energy management solutions with CHP systems. I, of course, spoke to all the companies and sought out those who had previously worked with museums, one company stood out: ENER-G. Originally a British company with global offices, plus a local office in NYC, they provide organizations across the globe with energy management services, sustainable technologies and renewable energy solutions, to help them intelligently generate, buy and manage energy.
Back in 2010-2011 ENER-G installed four new CHP units for, at the new (at the time) Museum of Liverpool, which guaranteed annual savings of more than $750,0000. “And the ‘trigeneration’ technology, which created highly efficient heat, electricity and cooling, also reduced carbon emissions by 884 tons each year – equivalent to the environmental benefit of taking 295 cars off the road.” Pretty impressive!
What’s even more interesting is that ENER-G was commissioned by National Museums Liverpool, the group responsible for all the diverse museums in Liverpool to design and install the new CHP system at the Mann Island site – part of the famous Pier Head at the core of the World Heritage Site on Liverpool’s famous waterfront. And ENER-G will solely operate and maintain the plant for 17 years. The actual CHP system was split between a faciliteis room in the Museum of Liverpool and the historic Great Western Railwlay (GWR) Goods Shed on Liverpool’s waterfront. “ENER-G converted the Goods Shed into a state-of-the-art energy center with sophisticated remote monitoring and diagnostic facilities. When designing and building GWR ENER-G had to adhere to planning conditions and design the energy center to operate independently of the utility electrical supply.”
Now to explain a little more about how the CHP or cogeneration system works. It generates electricity and recovers and reuses the majority of the heat created in the process. In conventional power stations this heat is simply wasted into the atmosphere through power station cooling towers and along the miles of electrical distribution cables needed to bring the power to site. Instead, by using CHP to generate electricity on site the heat is used to provide heating and hot water for the museum in the winter, and air conditioning and chilled water via the absorption cooling system in the summer months. The utility grid supply will provide additional back up, if required. Using a system like this automatically sets your institution up for major energy and financial savings.
The Museum of Liverpool are also able to use the GWR Building housing the CHP plant for an educational resource in its own right. As it has a small visitor facility where groups can gain an understanding of the technology and its contribution to the museum’s sustainability. Not only was the museum able to drastically reduce their energy consumption, but they also gained a teaching tool for others to learn and follow in their footsteps.