CLEED

Sustainability Consultancy for Cultural Institutions

By

@Exploratorium at Pier 15 – 2016 #AIA COTE Top Green Projects

Exploratorium-Bay-between-Piers-15

It is exciting to see that a museum was chosen as one of the 2016 AIA COTE top ten green projects of the year! Check out the specs via AIA below.

From the AIA:

The Exploratorium in San Francisco, CA, is an interactive science museum that also demonstrates innovation and sustainability in its design and construction. The building takes advantage of the historic pier shed’s natural lighting and the 800’ long roof provided room for a 1.3 megawatt photovoltaic array. The water of the Bay is used for cooling and heating. Materials were used that that are both sustainable and durable enough to withstand a harsh maritime climate. The project is certified LEED Platinum and is close to reaching its goal of being the country’s largest Net Zero energy museum and an industry model for what’s possible in contemporary museums.

BY THE NUMBERS:

  • Estimated percent of occupants using public transit, cycling or walking: 47%
  • Daylighting at levels that allow lights to be off during daylight hours: 50%
  • Lighting Power Density: 0.78 watts/sf
  • Views to the Outdoors: 75%
  • Percent reduction of regulated potable water: 50%
  • Total EUI predicted (kBtu/sf/yr): 42
  • Net EUI predicted (kBtu/sf/yr): 6
  • Percent reduction from National Median EUI for Building Type (predicted): 92%

exoloreBruce Damonte
Photo Credit: Bruce Damonte Photography

 

By

Clean Energy Industry To Be Transformed

solar-and-wind-energy 1

Good news for the clean energy industry, as U.S. lawmakers agreed to extend tax credits for solar and wind for another five years. This will give much needed boost to the industry and change the course of how the US deploys energy.

The extension adds an extra 20 gigawatts of solar power— this is more than every panel ever installed in the U.S. prior to 2015, according to Bloomberg New Energy Finance (BNEF). This deal is huge it is likely to change the landscape of US renewable energy for the future.

The wind credit will contribute another 19 gigawatts over five years. Combined, the extensions will spur more than $73 billion of investment and supply enough electricity to power 8 million U.S. homes, according to BNEF.

“This is massive,” said Ethan Zindler, head of U.S. policy analysis at BNEF. In the short term, the deal will speed up the shift from fossil fuels more than the global climate deal struck this month in Paris and more than Barack Obama’s Clean Power Plan that regulates coal plants, Zindler said.
This is solid boost for the solar and wind industries, the cost of installing has dropped more than 90% since the original tax credits were put in place. Now the industry has 5 consecutive years to hopefully make both solar and wind the cheapest energy in most US states, surpassing natural gas and coal. This is a very positive step in the right direction, it will give us a clear indication of how the markets will react, maybe this is the push we need to make renewables the number one energy source for the US. A good way to start 2016!

By

@GreenBuild Recap Top 10 #GreenProducts & Technologies

Building-Green 1

This year GreenBuild took place on the hill in DC. If you wanted to learn the latest about sustainable building it was the place to be! It featured three jam-packed days of top speakers, endless networking opportunities, showcases, LEED workshops and in-depth tours of green buildings in Washington, DC.

Here’s a short recap from of the best 10 products, technologies and cutting edge ideas. They all can be pretty technical, but I am partial to the last one, USAI Lighting Color Select Tunable Lighting. This kind of controllable lighting could be a key option for museum collections requiring a special spectrum of light. Be on the look out for them!

  1. Johns Manville ENRGY 3.E Halogen-Free Polyiso Insulation
    Johns Manville is the first manufacturer to sell a polyisocyanurate roofing insulation not containing TCPP, or Tris (1-chloro-2-propyl) phosphate, the halogenated flame retardant used in polyiso and spray foam.
  2. These furnishings are made from natural latex and do not require chemical flame retardants.
  3. The materials that go into the KI Chair come from agriculturally-sourced methane rather than petroleum, which makes the chair carbon-negative.
  4. FocalPoint Bioretention System
    This filtration systems provides the performance of natural storm water filtration on a very small footprint.
  5. Multistack Magnetic Levitation Chillers with Danfoss Compressors
    These chillers cool offices, schools, and large commercial buildings; they are energy-efficient and eliminate the need for mechanical seals, gears, pumps, and many other conventional components.
  6. Fluid-Applied Cat 5 Air Barrier System from Prosoco
    The parts that make up these air barriers are based on the high-performance “hybrid” polymer chemistry, which lacks solvents and isocyanates; in addition, the removal of phthalate plasticizers makes them eligible for use in Living Building Challenge Products.
  7. Clean Energy Collective
    The collective develops locally-sited photovoltaic facilities across the U.S. and engages with local utilities so that local people can purchase and own PV panels within a shared array.
  8. Cascadia Clip Thermal Spacers
    The Cascadia Clip offers support for cladding over insulation, and it decreases thermal bridging more effectively than conventional methods.
  9. Marvin Windows with U.S. Passive House Certification
    Marvin Windows is the first major American window manufacturer to issue a Passive House Institute U.S.-certified window. These windows are available with FSC-certified wood.
  10. This product blends the efficacy of LEDs with the ability to provide users complete control over the color and intensity of their interior lighting.

For for information check out the full article at

By

Tour of SIMS Municipal Recycling via OpenHouseNewYork

Photo Courtesy of Marc Lins Selldorf ArchitectsSunst Park MRF_Exterior 1.ashxIt is always fascinating to find out where exactly all the metal, glass and plastic that I faithfully recycle each week goes. So last week I toured the which is the principal facility to recycle all curbside metal, glass and plastic in New York City. It is a central element of Mayor Bloomberg’s PlaNYC 2030 to develop sustainable waste management in NYC. Nestled on the waterfront at 29th St. you can’t miss the 100kW wind turbine which signals you have arrived.

20151017_154417Approximately 19,000 tons of metal, plastic and glass are collected monthly by the Department of Sanitation and Sunset Park MRF can recycle this and more! The facility is also home to the largest solar power installation in NYC. Designed by SIMS MRF was built to optimize environmental performance. It boasts a gravity-based stormwater system using landscape features, bio-swales and a retention pond. Plus the city created 3 artificial reefs for intertidal habitat for both marine and bird lifew hich helps to mitigate the effects of dredging. Lastly, it has an cheerful kid-friendly Recycling Education Center, programming, interactive exhibits and a theater. All in all an impressive facility and worth a visit, especially if you have kids.

sims 5

By

Green Mountain Energy Helps Philadelphia Zoo Be More Sustainable

philly

This is super exciting news to me, I know a bit nerdy! I’ve been a customer for about 8 years and thoroughly support everything they do, so finding out that they were able to partner up with the Philadelphia Zoo on solar golf carts…very cool.

The donates to many projects that “enhance the quality of life through long-term, sustainable solutions that focus on people and the planet.” Recently, the Philadelphia Zoo was the proud recipient of $100,000 to be dedicated to increasing it’s already existing sustainability initiatives. The money was chosen to fund solar golf carts, which will immensely help zoo employees to get around the 42-acre park in much less time and more efficiently. Each solar-powered golf cart can generate enough clean energy to drive more than 1,600 miles annually. That’s a lot of miles around the park!

As the nation’s first zoo, Philadelphia is doing a tremendous job creating and implementing . “With more than 1.35 million visitors annually, they aim to educate their community, model sustainable practices and provide their visitors with tools for taking action to live greener in their own lives, empowered to make a difference.” Presently the Zoo is working toward strategies to lessen their environmental footprint in five key areas:
1) improve energy efficiency
2) reduce, and manage greenhouse gas (GHG) emissions
3) consistently conserve, and increasingly collect and reuse water
4) Use current best practices to manage stormwater on site and
5) conserve resources and avoid the use of hazardous materials through waste diversion and green purchasing.

This is very commendable, as we all know thoughtful zoos require an enormous amount of people’s energy and mechanical energy to run. It’s more than important to keep the animals healthy, it’s an utmost necessity!

Also if you’re in Philadelphia any time soon, right now they also have a unique exhibit called , which is “an array of artist installations, some larger than life, each one telling stories of endangered animals through the use of recycled, reduced, reused, repurposed and renewed materials.”