CLEED

Sustainability Consultancy for Cultural Institutions

By

#AAM2016 Follow Up & @PICGreen SEA Awards

aamexpoHere is a recap of the PIC Green Events at AAM 2016 Conference and Expo. First, all the events and sessions were an overwhelming success! So, it shows there is a definite growing interest to learn how to make your institution more sustainable.
We had the following sessions:
1. Energy Efficient Cold Storage
2. Future Choices – Best Practices for Profession
3. Environmental Sustainability – Power, Influence and Responsibility
4. Stages of Sustainability
5. Sustainability Sins

picOur winners for the SEA (Sustainability Excellence Awards) for the following categories: Facilities, Programs and Exhibits were as follows:

usbotanicAnd the field trip to the US Botanic Garden was educational and bursting with sustainable initiatives, we even received our very own instruction manual for teaching. Check out the Sustainable SITES Initiative!

The Expo had a few highlights, but I have to mention the Virtual Reality Booth by SimWave Consulting in Canada. If you are an interactive museum, then you are going to want to keep an eye on their technology.

And a huge thank you to the Natural History Museum for letting us use their booth and partnering up in many ways moving forward!

Until next year in St. Louis…..keep up the green momentum!

 

 

By

Nation’s First #Solar-Powered Community Under Construction

cdnassets.hw.net

Phase One of Babcock Ranch, FL is slated to open next year.

It’s pretty exciting to see that a whole community will be powered by the sun and what better place than Florida. Per EcoBuildingPulse,com, in 2006, developer Syd Kitson released plans for Babcock Ranch, a massive community to consist of 19,500 homes powered exclusively by the sun (but void of any unsightly solar systems on roofs).

Instead of individual PV panels, the community and the broader region will be supplied with solar energy via Florida Power and Light’s 74.5 megawatt Babcock Ranch Solar Energy Center. Expected to be operational by the end of the year, the 443-acre solar power plant will be located in the Babcock Ranch and will supply more than enough energy to meet residents’ needs, according to project planners.

“Babcock Ranch will exemplify what it means to be a town of the future, offering residents a highly unique balance of the most technologically advanced infrastructure and amenities, with ready access to a rich natural environment and a true sense of community,” says Kitson, CEO of West Palm Beach, Fla.-based development firm Kitson & Partners.

Phase 1 development encompasses 1,100 single-family and multifamily residences and a downtown area with a wellness center, café, restaurant, and outdoor outfitter shop.

For more information check out Builderonline.com. We’ll be on the look out for the development of the town, they should be welcoming their new residents by 2017.

By

@Exploratorium at Pier 15 – 2016 #AIA COTE Top Green Projects

Exploratorium-Bay-between-Piers-15

It is exciting to see that a museum was chosen as one of the 2016 AIA COTE top ten green projects of the year! Check out the specs via AIA below.

From the AIA:

The Exploratorium in San Francisco, CA, is an interactive science museum that also demonstrates innovation and sustainability in its design and construction. The building takes advantage of the historic pier shed’s natural lighting and the 800’ long roof provided room for a 1.3 megawatt photovoltaic array. The water of the Bay is used for cooling and heating. Materials were used that that are both sustainable and durable enough to withstand a harsh maritime climate. The project is certified LEED Platinum and is close to reaching its goal of being the country’s largest Net Zero energy museum and an industry model for what’s possible in contemporary museums.

BY THE NUMBERS:

  • Estimated percent of occupants using public transit, cycling or walking: 47%
  • Daylighting at levels that allow lights to be off during daylight hours: 50%
  • Lighting Power Density: 0.78 watts/sf
  • Views to the Outdoors: 75%
  • Percent reduction of regulated potable water: 50%
  • Total EUI predicted (kBtu/sf/yr): 42
  • Net EUI predicted (kBtu/sf/yr): 6
  • Percent reduction from National Median EUI for Building Type (predicted): 92%

exoloreBruce Damonte
Photo Credit: Bruce Damonte Photography

 

By

Clean Energy Industry To Be Transformed

solar-and-wind-energy 1

Good news for the clean energy industry, as U.S. lawmakers agreed to extend tax credits for solar and wind for another five years. This will give much needed boost to the industry and change the course of how the US deploys energy.

The extension adds an extra 20 gigawatts of solar power— this is more than every panel ever installed in the U.S. prior to 2015, according to Bloomberg New Energy Finance (BNEF). This deal is huge it is likely to change the landscape of US renewable energy for the future.

The wind credit will contribute another 19 gigawatts over five years. Combined, the extensions will spur more than $73 billion of investment and supply enough electricity to power 8 million U.S. homes, according to BNEF.

“This is massive,” said Ethan Zindler, head of U.S. policy analysis at BNEF. In the short term, the deal will speed up the shift from fossil fuels more than the global climate deal struck this month in Paris and more than Barack Obama’s Clean Power Plan that regulates coal plants, Zindler said.
This is solid boost for the solar and wind industries, the cost of installing has dropped more than 90% since the original tax credits were put in place. Now the industry has 5 consecutive years to hopefully make both solar and wind the cheapest energy in most US states, surpassing natural gas and coal. This is a very positive step in the right direction, it will give us a clear indication of how the markets will react, maybe this is the push we need to make renewables the number one energy source for the US. A good way to start 2016!

By

@GreenBuild Recap Top 10 #GreenProducts & Technologies

Building-Green 1

This year GreenBuild took place on the hill in DC. If you wanted to learn the latest about sustainable building it was the place to be! It featured three jam-packed days of top speakers, endless networking opportunities, showcases, LEED workshops and in-depth tours of green buildings in Washington, DC.

Here’s a short recap from of the best 10 products, technologies and cutting edge ideas. They all can be pretty technical, but I am partial to the last one, USAI Lighting Color Select Tunable Lighting. This kind of controllable lighting could be a key option for museum collections requiring a special spectrum of light. Be on the look out for them!

  1. Johns Manville ENRGY 3.E Halogen-Free Polyiso Insulation
    Johns Manville is the first manufacturer to sell a polyisocyanurate roofing insulation not containing TCPP, or Tris (1-chloro-2-propyl) phosphate, the halogenated flame retardant used in polyiso and spray foam.
  2. These furnishings are made from natural latex and do not require chemical flame retardants.
  3. The materials that go into the KI Chair come from agriculturally-sourced methane rather than petroleum, which makes the chair carbon-negative.
  4. FocalPoint Bioretention System
    This filtration systems provides the performance of natural storm water filtration on a very small footprint.
  5. Multistack Magnetic Levitation Chillers with Danfoss Compressors
    These chillers cool offices, schools, and large commercial buildings; they are energy-efficient and eliminate the need for mechanical seals, gears, pumps, and many other conventional components.
  6. Fluid-Applied Cat 5 Air Barrier System from Prosoco
    The parts that make up these air barriers are based on the high-performance “hybrid” polymer chemistry, which lacks solvents and isocyanates; in addition, the removal of phthalate plasticizers makes them eligible for use in Living Building Challenge Products.
  7. Clean Energy Collective
    The collective develops locally-sited photovoltaic facilities across the U.S. and engages with local utilities so that local people can purchase and own PV panels within a shared array.
  8. Cascadia Clip Thermal Spacers
    The Cascadia Clip offers support for cladding over insulation, and it decreases thermal bridging more effectively than conventional methods.
  9. Marvin Windows with U.S. Passive House Certification
    Marvin Windows is the first major American window manufacturer to issue a Passive House Institute U.S.-certified window. These windows are available with FSC-certified wood.
  10. This product blends the efficacy of LEDs with the ability to provide users complete control over the color and intensity of their interior lighting.

For for information check out the full article at